Configure Grandstream Wave Phone App by Entering Data
Several soft phone apps can be used. These include:
  1. Grandstream Wave
  2. Zioper
  3. CSipSimple
  4. MizuTech
Instructions below are for the Grandstream Wave.
In Step-37, the dot must be green.
If not, check values for:
  1. Step-12: SIP Server
  2. Step-13: SIP User ID
  3. Step-14: SIP Authentication ID
  4. Step-15: Password
1. Go Google Play Store
Image: Go to Google Play Store
2. Search box
Image: Grandstream Wave Startup
3. Type "grandstream"
Image: Search for Grandstream App
4. Click "Install"
Image: Install Grandstream Wave App
5. Locate, start app
Image: Locate, Start GS Wave App
6. Click "Settings"
Image: Click Settings
7. "Account Settings"
Image: Account Settings
8. Click "+" sign (add account)
Image: Add Account
9. Click "SIP Account"
Image: Select SIP Account
10. Put information needed
Image: List of Account Information
11. Account Name
Image: Enter Account Name
12. SIP Server
Image: Enter SIP Server
13. SIP User ID
Image: Enter SIP User ID
14. SIP Authentication ID
Image: Enter SIP Authentication ID
15. Password
Image: Enter Password
16. Voicemail User ID
Image: Enter Voicemail User ID
17. Display Name
Image: Enter Display Name
18. Save, Go back
Image: Save, Go Back
19. General Settings
Image: General Settings
20. Click Transmission Protocol
Image: Click Transmission Control
21. Select TCP, then back arrow
Image: Select TCP, then Back Arrow
22. Down to "Preferred Vocoder"
Image: Down to Preferred Vocoder
23. Click "WIFI"
Image: Click WIFI
24. Uncheck "PCMU" and "PCMA"
Image: Uncheck PCMU and PCMA
25. Check "OPUS", then save
Image: Check OPUS then Save
26. Click "2G/3G/4G"
Image: Click 2G/3G/4G
27. Uncheck "PCMU", "PCMA"
Image: Uncheck PCMU, PCMA
28. Check "OPUS", then save
Image: Check OPUS then Save
29. Click back arrow
Image: Click Back Arrow
30. Click back arrow again
Image: Click Back Arrow Again
31. Click "Advanced Settings"
Image: Click Advanced Setting
32. In "Advanced Settings"
Image: In Advanced Settings
33. Scroll, "STUN Server Settings"
Image: Scroll to STUN Server Settings
34. Enter value, click "OK"
Image: Enter Value then Click OK
35. Click back arrow
Image: Click Back Arrow
36. Click Account Settings
Image: Click Account Settings
37. Note green dot, click Keypad
Image: Note Green Dot, Click Keypad
38. Go to Enter Phone Number box
Image: Go to Enter Phone Number Box
39. Type *98, click "Dial" button
Image: Type *98, Click Dial Button
40. Verify number is dialed
Image: Verify Number is Dialed