Configure Grandstream Wave Phone App With QR Code Scan
1. Locate and start GW Wave app![]() |
2. Click Settings![]() |
3. Click Account Settings![]() |
4. Click "+" sign to add new account![]() |
5. Select UCM Account Scan QR Code)![]() |
6. Locate QR code that was emailed![]() |
7. Select the QR Code image![]() |
8. In popup, click Done to create account![]() |
9. Account created, dot is red, go back![]() |
10. Now at General Settings, scroll down![]() |
11. Scroll Down. Click Transmission Protocol![]() |
12. Select TLS Protocol. Go back![]() |
13. Scroll down to Preferred Vocoder![]() |
14. Click WiFi![]() |
15. Select PCMU, PCMA, OPUS; save![]() |
16. Click 2G/3G/4G![]() |
17. Select PCMU, PCMA, OPUS; save![]() |
18. Return to Preferred Vocoder![]() |
19. Click back arrow![]() |
20. Scroll down, click SRTP Mode![]() |
21. Select Enabled and forced, go back![]() |
22. Check that dot is green, click keypad![]() |
23. Enter "555" in keypad, press Dial![]() |
24. Enter "555" in keypad, press Dial![]() |
25. Call in progress, encrypted![]() |